SuperAPI AI Directory
Partner中文AI newsFavorites
Skillsrouteros-netinstall

routeros-netinstall

Deployment & operations

View repository

Updated 10-16 02:29

About this skill

RouterOS Netinstall

This skill focuses on official Netinstall / netinstall-cli behavior. tikoci/netinstall is a useful wrapper and source of grounded examples, but it is only one way to drive the tool.

What netinstall-cli Does

Netinstall reinstalls RouterOS onto a device that has booted into etherboot mode. The Linux tool, netinstall-cli, listens for BOOTP requests and then sends the RouterOS boot image and selected .npk packages.

Grounded behavior from MikroTik docs:

  • Netinstall re-formats the system drive
  • It does not erase the RouterOS license key
  • It does not reset RouterBOOT settings
  • It works over a direct Layer 2 path using BOOTP/DHCP ports and TFTP
  • It requires root / sudo

netinstall-cli is the Linux command-line variant. The Windows GUI exposes nearly the same core options.

Command Syntax

netinstall-cli [-r] [-e] [-b] [-m [-o]] [-f] [-v] [-c]
               [-k <keyfile>] [-s <userscript>] [-sm <modescript>]
               [--mac <mac>] {-i <interface> | -a <client-ip>} [PACKAGES...]

Flags

Flag Meaning
-r Reinstall and apply the default-configuration stage
-e Reinstall with empty configuration
-b Discard the currently installed branding package
-m Enable repeated installs in one run
-o With -m, only reinstall a given MAC once per run; by itself it behaves like a normal single install
-f Ignore storage-size checks
-v Verbose output
-c Allow multiple netinstall instances on the same host
-k <keyfile> Install a license key (.KEY)
-s <userscript> Install a persistent configure script that replaces the RouterOS-supplied default configuration script
-sm <modescript> Install a one-time mode script for the first boot after install
--mac <mac> Only respond to this MAC address
-i <interface> Bind to a specific interface
-a <client-ip> Assign a specific client IP; if -i is used, server IP is auto-detected

Hard Rules

  1. The system package must be listed first. Put routeros-...npk first in the package list.
  2. Root privileges are required. Netinstall uses privileged BOOTP/TFTP ports.
  3. Multi-arch package sets are allowed. Netinstall detects the device architecture and only uses matching packages.
  4. No -r and no -e means "keep old configuration". Netinstall downloads the current configuration database, reformats the device, and uploads that configuration back. This does not preserve user files or databases such as Dude or User Manager.

Install Workflow and Script Order

The official workflow is:

  1. Put the device into etherboot
  2. Run Netinstall with the desired packages and optional scripts
  3. On the next boot, RouterOS runs the initial-configuration steps

For Linux netinstall-cli, the important first-boot order is:

  1. Mode script (-sm) runs first
  2. Custom/default configuration runs after that
  3. If the mode script changes device-mode, the device reboots immediately after the mode script completes

That ordering matters: use -sm for first-boot state that must happen before default or custom configuration, especially /system/device-mode and protected-routerboot.

Configure Script vs Mode Script

The docs use several names for the persistent -s script: configure script, initial configuration, and the custom default configuration script visible at:

/system/default-configuration/custom-script/print

These two script types are different:

Feature Configure script (-s) Mode script (-sm)
Purpose Replace RouterOS-supplied default config script One-time first-boot actions before config scripts
When it runs As the device's default-configuration stage On first boot after install, before custom/default config
Persistence Stored on device Auto-removed after execution
Survives upgrades Yes No
Later /system reset-configuration Runs again after reset Does not persist for later resets
Version requirement Available in RouterOS 7.x docs Requires RouterOS 7.22+ and netinstall-cli 7.22+
Timeout 120 seconds 120 seconds
File format Regular RouterOS import file (.rsc) Regular RouterOS import file (.rsc)

Additional grounded details:

  • Configure scripts can read $defconfPassword and $defconfWifiPassword starting with RouterOS 7.10beta8
  • MikroTik docs explicitly suggest introducing a delay before configure-script execution
  • If a router was netinstalled with a configure script, later /system reset-configuration runs that same script again until the device is re-netinstalled without it

Package URLs and Naming

Use the normal RouterOS download tree:

https://download.mikrotik.com/routeros/{version}/routeros-{version}-{arch}.npk
https://download.mikrotik.com/routeros/{version}/all_packages-{arch}-{version}.zip
https://download.mikrotik.com/routeros/{version}/netinstall-{version}.tar.gz

Use download.mikrotik.com first for all release channels. Treat cdn.mikrotik.com as a fallback mirror/cache, not the primary version rule.

Architecture suffixes

Architecture Package form
arm routeros-7.22-arm.npk
arm64 routeros-7.22-arm64.npk
mipsbe routeros-7.22-mipsbe.npk
mmips routeros-7.22-mmips.npk
smips routeros-7.22-smips.npk
ppc routeros-7.22-ppc.npk
tile routeros-7.22-tile.npk
x86 routeros-7.22.npk

x86 is the naming exception: the package filename omits the architecture suffix, but the all-packages ZIP still uses x86, for example all_packages-x86-7.22.zip.

Download and Run

Official Linux quick-start pattern:

wget https://download.mikrotik.com/routeros/7.22/netinstall-7.22.tar.gz
tar -xzf netinstall-7.22.tar.gz

sudo ./netinstall-cli -r -i eth0 \
  routeros-7.22-arm64.npk \
  container-7.22-arm64.npk

Static IP on the netinstall host is strongly recommended, for example:

sudo ifconfig eth0 192.168.88.2/24

Common Scripted Cases

Empty config

sudo ./netinstall-cli -e -b -i eth0 \
  routeros-7.22-arm64.npk

Keep old configuration

sudo ./netinstall-cli -i eth0 \
  routeros-7.22-arm64.npk

This keeps the configuration database only; it does not preserve files stored on the device.

First-boot mode script

/system/device-mode update mode=advanced container=yes

sudo ./netinstall-cli -r -sm modescript.rsc -i eth0 \
  routeros-7.22-arm64.npk \
  container-7.22-arm64.npk

This is the main documented use for -sm: set device mode during the first boot without requiring a later manual confirmation flow.

Etherboot Notes

Devices must be in etherboot mode before Netinstall can see them. Common entry methods:

  • reset button
  • serial console (Ctrl+E)
  • RouterOS setting boot-device=try-ethernet-once-then-nand

Netinstall uses BOOTP/DHCP ports, so avoid other DHCP sources on the same segment. The docs also call out two common failure cases:

  • some USB Ethernet adapters create an extra link flap and the device is missed
  • DHCP snooping can block the packets unless the Netinstall-facing port is trusted

Non-x86 Hosts

netinstall-cli is a Linux i386 ELF binary.

Host Practical approach
x86_64 Linux Run it directly
ARM/ARM64 Linux Use QEMU user-mode (qemu-i386-static or qemu-i386)
macOS Run Linux in a VM with bridged networking

This is where tikoci/netinstall is useful as a reference wrapper: it automates package download, QEMU-on-ARM, and macOS VM execution, but the underlying Netinstall behavior is still the same netinstall-cli flow documented above.

Related References