Name the effect. A precise term is the difference between a brief another agent can execute and one it has to guess at.
This skill is a lookup, not a design tool. Once the effect has a name, hand off:
motion-craft to specify or review it, reverse-engineer-motion to reconstruct
it from a recording, prototype-lab to compare directions.
How to answer
- Read for the sensation, not the keywords. People describe what they see and feel — "springy", "it peels away", "it draws itself in" — not the technical name. Map the sensation to the glossary.
- Lead with the term. One bold name, one sentence of definition. A naming question wants a name, not an essay.
- Disambiguate close neighbours. When two terms compete, give the best match first, then one or two alternates with the single distinction that separates them.
- Say when nothing matches. Name the closest term and call it an approximation, or describe the effect as a composite in this vocabulary — "that is a stagger of scale-in entrances". Do not invent a term.
- Add the rule only when it changes the ask. If the named effect is one this
collection restricts — anything gated by frequency, or
ease-inon UI — say so in one line so the user does not brief something they should not ship.
Answer format:
**Term** — one-sentence definition.
Close alternates:
- **Other term** — the one distinction that separates it.
Glossary
Entrances and exits
- Fade in / fade out — appears or disappears by opacity alone.
- Slide in — enters by translating from off-screen along one axis.
- Scale in — grows from smaller to full size, usually paired with a fade.
- Pop in — appears with a slight overshoot, as if bouncing into place.
- Reveal — uncovered progressively, typically by animating a
clip-pathor mask rather than by moving the element. - Materialize — a translucent surface arrives by animating blur and scale together, so it reads as a material rather than an opacity fade.
- Enter / exit — the animation an element plays when it is added to or removed from the tree.
Sequencing and timing
- Keyframes — defined points in a timeline that the browser interpolates between.
- Interpolation / tween — generating the in-between values so motion is continuous.
- Stagger — animating several items one after another with a small delay, producing a cascade.
- Orchestration — timing several animations so they read as one coordinated motion.
- Delay — time before an animation starts.
- Duration — how long an animation takes.
- Dwell — deliberate stillness inside a loop, so the resting state is readable between transitions.
- Fill mode — whether an element keeps its first or last frame's styles outside the animation's active period.
- Stepped animation — motion divided into discrete jumps rather than continuous interpolation, like a ticking second hand.
Movement and transforms
- Translate — move along an axis.
- Scale — resize. Note that
scale()also scales an element's children. - Rotate — spin around a point.
- Skew — shear out of the rectangular grid along an axis.
- 3D tilt / flip — rotate in three dimensions (
rotateX,rotateY) for depth. - Perspective — how strongly the 3D effect reads; a lower value exaggerates depth.
- Transform origin — the anchor point a scale or rotation acts from.
- Origin-aware animation — an element animates out of its trigger rather than its own centre, so a popover appears to grow from the button that opened it.
Transitions between states
- Crossfade — one element fades out as another fades in, in the same place.
- Continuity transition — a change that keeps the user oriented by visually connecting before and after.
- Morph — one shape smoothly becomes another shape.
- Shared element transition — an element travels and transforms from one position into another, like a thumbnail expanding into a detail view.
- Layout animation — when an element's size or position changes, it animates to the new geometry instead of snapping. Usually implemented with FLIP.
- FLIP — First, Last, Invert, Play: measure both states, apply an inverting transform, then animate it away. The technique underneath most layout animations.
- View transition — the browser itself morphs between two document states, connecting elements it can pair.
- Accordion / collapse — a section expands and collapses its height to show or hide content.
- Direction-aware transition — content slides one way going forward and the other going back, so navigation carries a sense of direction.
Scroll
- Scroll reveal — elements animate in as they enter the viewport.
- Scroll-driven animation — progress tied directly to scroll position rather than to time.
- Parallax — foreground and background move at different rates, implying depth.
- Sticky / pinned section — an element holds position while content scrolls past it.
- Scroll snap — scrolling settles on defined points rather than anywhere.
- Scroll edge effect — a blur or gradient mask where content meets floating chrome, replacing a hard divider.
- Page transition — an animation when navigating between routes.
Feedback and interaction
- Hover effect — a visual change while the pointer is over an element.
- Press feedback — a subtle scale-down on press, so the control feels physical.
- Hold to confirm — a progress fill while a button is held, guarding a destructive action.
- Drag — moving an element by grabbing it, usually with momentum on release.
- Drag to reorder — dragging items in a list while the others shift to make room.
- Swipe to dismiss — dragging an element off-screen to close it.
- Rubber-banding — progressive resistance and snap-back when dragging past a boundary.
- Momentum projection — using release velocity to predict where a flick was going, then snapping to the nearest target from there.
- Velocity handoff — starting the post-gesture animation at the finger's exact release velocity, so there is no seam between dragging and animating.
- Hysteresis — a small movement threshold before a gesture commits to a direction.
- Shake / wiggle — a quick lateral jitter signalling rejected input.
- Ripple — a circle expanding from the point of contact.
Easing
- Easing — how speed changes across an animation.
- Ease-out — starts fast, ends slow. The default for UI and anything responding to the user.
- Ease-in — starts slow, ends fast. Avoided on UI; it delays the moment the user is watching.
- Ease-in-out — slow, fast, slow. For elements already on screen moving between poses.
- Linear — constant speed. Reserved for spinners, marquees, and scrubbing.
- Cubic-bezier — a custom curve defined by two control points.
- Asymmetric easing — accelerating and decelerating at different rates; reads as more alive than a symmetric curve.
- Asymmetric timing — a different duration for each direction: slow where the user is deciding, fast where the system responds.
Springs and physics
- Spring — motion driven by physics rather than a fixed duration.
- Stiffness / tension — how strongly the spring pulls toward its target; higher is snappier.
- Damping — how quickly it settles; lower means more oscillation.
- Damping ratio — the normalized form:
1.0is critically damped with no overshoot, below1.0overshoots. - Response — how quickly the value reaches its target, in seconds. Not the same as duration; a spring has no fixed end.
- Mass — how heavy the element feels; more mass is slower and more sluggish.
- Bounce — overshoot before settling.
- Perceptual duration — how long a spring feels finished, while it is still micro-settling underneath.
- Momentum — motion carrying velocity, especially after a drag.
- Interruptible animation — one that can be redirected mid-flight instead of finishing first.
- Additive animation — blending a new animation onto the current one so velocity carries through a reversal instead of hard-cutting.
- Presentation value — the value currently on screen, as distinct from the logical target. Interruptions must start from it.
Looping and ambient motion
- Marquee — content scrolling continuously in a loop.
- Loop — an animation that repeats.
- Alternate (yoyo) — a loop that reverses each iteration instead of jumping back to the start.
- Orbit — one element circling another on a continuous path.
- Pulse — a gentle repeating scale or opacity change that draws attention.
- Float — a slow continuous drift that makes a static element feel alive.
- Idle animation — subtle motion while an element waits to be used.
- Loop seam — the join between the last and first frame of a cycle. A visible seam is the usual cause of a "jumpy" loop.
Material and effects
- Blur — softens an element, or bridges two states during a crossfade.
- Clip-path — clips an element to a shape; the standard tool for reveals, wipes, and comparison sliders.
- Mask — like clip-path, but with soft, fadeable edges.
- Metaball / gooey effect — nearby rounded shapes visually merging into one continuous silhouette.
- Signed distance field (SDF) — representing shapes as distance functions so they can be blended mathematically; how a metaball merge is usually computed.
- Smooth union — the blend function that merges two distance fields into one rounded silhouette instead of a hard intersection.
- Marching squares — extracting a contour line from a sampled scalar field; how an SDF becomes a renderable path.
- Backdrop blur — blurring whatever sits behind a translucent surface.
- Vibrancy — adjusting foreground text over a translucent surface so it stays legible against changing content.
- Line drawing — an SVG path that draws itself in, as if traced.
- Text morph — text animating character by character as it changes.
- Number ticker — digits rolling or counting toward a value.
- Skeleton / shimmer — a placeholder with a travelling sheen shown while content loads.
- Typewriter — text appearing one character at a time.
- Before/after slider — a draggable divider wiping between two overlaid images.
Performance
- Frame rate (FPS) — frames drawn per second; 60 is the baseline, 120 on newer displays.
- Jank — visible stutter when the browser misses frame deadlines.
- Dropped frame — a single missed frame deadline.
- Compositing — letting the GPU move or fade an element on its own layer without redoing layout or paint.
- Layout thrashing — interleaving reads and writes, or animating layout properties, so the browser recalculates every frame.
- will-change — a hint that an element is about to animate, so the browser can promote it to its own layer in advance.
Principles
- Purposeful animation — motion that orients, gives feedback, or shows a relationship, rather than decorating.
- Frequency of use — the more often an animation is seen, the shorter and subtler it must be, until at high enough frequency it should not exist.
- Anticipation — a small wind-up opposite the coming motion.
- Follow-through — secondary parts settling after the main mass stops.
- Squash and stretch — deforming to convey weight and speed.
- Perceived performance — the right motion making an interface feel faster than it measurably is.
- Spatial consistency — an element keeping its identity and place across states, so users never lose track of where things went.
- Reduced motion — honoring the user's preference with a gentler variant, not an absent one.
Common mistakes
| Mistake | Fix |
|---|---|
| Answering with an essay | Lead with the term; expand only if asked |
| Inventing a term that sounds plausible | Name the closest match and say it is an approximation |
| One term offered where two genuinely compete | Give both, with the single distinction between them |
| Naming an effect this collection restricts, silently | Add one line on the rule so the brief is not wrong from the start |
| Paraphrasing the definition loosely | Keep definitions stable, so briefs stay consistent between sessions |
| Designing the animation instead of naming it | Hand off to motion-craft |