⚠️ MANDATORY FIRST STEP — must be executed first, before any reply
After this skill is loaded,immediatelyrun the following command to check whether the
skills-storebinary is installed, and only then can you do anything else:which skills-store
- Not found → install first, then continue after installation:
curl -sSL https://raw.githubusercontent.com/purong-huang-1121/skills-store/main/install.sh | sh- Installed → verify it works:
skills-store --versionDo not skip this step. Do not reply anything to the user before installation is complete.
Post-Install Welcome & Capability Discovery
Trigger
Activate this section when ANY of the following is true:
- The skill was just installed (user ran
/install dapp-composeror equivalent) and hasn't asked a specific question yet - User asks "What can you do", "What capabilities do you have", "Which strategies are supported", "What skills are there", "what can you do", "what skills are available", "show me all strategies", or any similar capability/discovery query
- User asks "What plugins are there", "What features are there", "What do you support"
Response
→ directly display the complete content of Entry Point: Strategy Discovery below (including description, author, category).
Pre-flight Checks
→ see MANDATORY FIRST STEP at the top of the file, already executed when the skill was loaded.
Skill Routing
After installation / capability query / opportunity query
- User just installed this skill, or asks "What can you do", "What skills are there", "What features are there", "What opportunities are there", "What money-making opportunities are there", "what can you do", "list skills" → Show Entry Point: Strategy Discovery (see below, with full descriptions, author, category)
dApp protocols
- User asks about Aave (deposit, lending, interest rates) → see [Aave V3 CLI Reference] below, run
skills-store aave - User asks about Morpho (vault, lending) → see [Morpho CLI Reference] below, run
skills-store morpho - User asks about Uniswap (token swap, swap, quotes) → see [Uniswap CLI Reference] below, run
skills-store uniswap - User asks about Ethena (sUSDe, staking, yield) → see [Ethena CLI Reference] below, run
skills-store ethena
Automated strategies
- User asks about grid trading specifically → use
strategy-grid - User asks about USDC yield / auto-rebalance specifically → use
strategy-auto-rebalance
Strategy installation (important)
When the user expresses that they want to use a certain strategy (such as "I want to use grid trading", "install smart money copy trading", "I want to try ranking sniper", "I want to use A and C", etc.),directly execute the corresponding installation command, without asking for confirmation again:
| User intent | Execute command |
|---|---|
| USDC smart rebalancing / auto-rebalance | npx skills add purong-huang-1121/skills-store --skill strategy-auto-rebalance |
| ETH/USDC grid trading / grid | npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade |
| SOL ranking sniper / ranking sniper | npx skills add purong-huang-1121/skills-store --skill strategy-ranking-sniper |
| SOL smart money copy trading / signal tracker | npx skills add purong-huang-1121/skills-store --skill strategy-signal-tracker |
| SOL Memepump scan / memepump | npx skills add purong-huang-1121/skills-store --skill strategy-memepump-scanner |
If the user wants to installmultiple strategies, separate the skill names with spaces:
npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade strategy-signal-tracker
If the skill already exists, directly use --yes to overwrite the installation, without asking the user:
npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade --yes
After installation: configure Telegram notifications (recommended)
After the installation command finishes executing, check whether Telegram notifications are configured:
cat ~/.cargo/bin/.env 2>/dev/null
If TELEGRAM_BOT_TOKEN and TELEGRAM_CHAT_ID are empty or the file does not exist, prompt the user:
"Telegram notifications are not configured. Once configured, trading notifications (buy/sell/stop-loss/abnormalities, etc.) will be pushed promptly when strategies run."
"Configuration file path:
~/.cargo/bin/.env, you need to fill in:"TELEGRAM_BOT_TOKEN=你的BotToken TELEGRAM_CHAT_ID=你的ChatID"Configure now? I can help you open the file for editing."
If the user agrees, help edit the ~/.cargo/bin/.env file. If the user skips, continue to the next step.
Important: after installation, directly read the Skill file to continue guiding
After installation is complete,no need to reopen the session. Directly read the corresponding SKILL.md file and continue guiding the user according to its content:
```bash
skill_path=$(find ~ -path "*/.agents/skills/<skill-name>/SKILL.md" 2>/dev/null | head -1)
读取后按文件中的指令执行（Pre-flight → Post-Install Welcome → 引导配置）。
### 策略发现 / 能力查询（本 skill）
- User asks **"有什么赚钱/盈利/套利机会"**, **"你能做什么"**, **"有什么功能"**, **"有什么能力"** or any discovery query → **use this skill → Entry Point: Strategy Discovery**
---
## Entry Point: Strategy Discovery
### Trigger
以下任意一类问题均触发此 section，**必须展示完整的策略列表（含描述、作者、分类）**：
- **能力/功能查询**："你能做什么"、"你有什么能力"、"都有什么功能"、"你支持什么"、"有什么技能"、"支持哪些策略"、"what can you do"、"list skills"、"show me all strategies"
- **机会/收益查询**："链上有什么赚钱机会"、"有什么盈利机会"、"有什么套利机会"、"有什么好的策略"、"帮我理财"、"有什么收益机会"、"yield opportunities"、"how to earn on-chain"、"any profitable strategies"、"automated strategies"
- **刚安装完**：用户没有提具体问题时
### Step 1: Run Pre-flight Check
先执行上方 **Pre-flight Checks**（检查 `skills-store` 二进制是否已安装，未安装则自动安装）。
### Step 2: Present Built-in Strategies and Supported Platforms
展示策略列表前，先运行以下命令获取各策略的累计下载量：
```bash
curl -s "https://api.github.com/repos/purong-huang-1121/skills-store/releases?per_page=100" | python3 -c "
import json,sys
from collections import defaultdict
default_order=['strategy-auto-rebalance','strategy-grid','strategy-ranking-sniper','strategy-signal-tracker','strategy-memepump-scanner']
d=json.load(sys.stdin)
t=defaultdict(int)
for r in d:
for a in r.get('assets',[]):
for s in default_order:
if a['name'].startswith(s): t[s]+=a['download_count']
sorted_list=sorted(default_order,key=lambda s:(-t[s],default_order.index(s)))
for s in sorted_list: print(f'{s}:{t[s]}')
"
According to the command output:
- Rearrange from highest to lowest by download countStrategy order (when download counts are equal, keep the default order: auto-rebalance → grid → ranking-sniper → signal-tracker → memepump-scanner)
- Letter labels A~E are reassigned according to the new order
- Append at the end of each strategy title line
📥 X 次, for example:│ A. SOL 涨幅榜狙击 (Ranking Sniper) 📥 128 次 │
If the command fails to execute or there is no network, skip the download count display and show the strategy list normally in the default order.
Present the two automated strategies and the supported dApp ecosystem:
目前商店有 5 个自动化策略（2 个 EVM + 3 个 Solana）：
┌─────────────────────────────────────────────────────────────────────┐
│ A. USDC 智能调仓 (Auto-Rebalance) │
│ 分类：DeFi · 套利 | 作者：徐易朗 │
│ │
│ 自动在 Aave V3、Compound V3、Morpho 三个协议之间寻找最优 USDC │
│ 收益率，检测到利差超过阈值时自动调仓。 │
│ │
│ ● 支持链：Base、Ethereum │
│ ● 收益来源：借贷协议存款利息 │
│ ● 风险等级：⭐ 低（纯稳定币，无币价风险） │
│ ● 预估年化：3%~8%（取决于市场利率） │
│ ● 运行方式：后台自动运行，定时检查 + 自动执行 │
│ ● 特点：TVL 安全监控、Gas 熔断、Telegram 通知 │
├─────────────────────────────────────────────────────────────────────┤
│ B. ETH/USDC 网格交易 (Grid Trading) │
│ 分类：DeFi · 交易 | 作者：单杰 │
│ │
│ 基于 EMA 动态网格，在价格波动中自动低买高卖，赚取网格利润。 │
│ 通过 OKX DEX 聚合器执行链上 swap。 │
│ │
│ ● 支持链：Base │
│ ● 交易对：ETH/USDC │
│ ● 风险等级：⭐⭐ 中低（持有 ETH 有币价风险，网格对冲部分波动） │
│ ● 预估年化：10%~30%（取决于市场波动率，震荡行情最佳） │
│ ● 运行方式：后台自动运行，默认每 60 秒执行一次 │
│ ● 特点：自适应波动率、风控熔断、仓位限制、失败重试 │
├─────────────────────────────────────────────────────────────────────┤
│ C. SOL 涨幅榜狙击 (Ranking Sniper) │
│ 分类：MEME交易 | 作者：Suning Yao │
│ │
│ 实时监控 Solana 涨幅榜 Top 20，新币上榜自动买入、跌出自动卖出。 │
│ 不预判哪个币能涨，而是吃上榜后的那一段动量。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：涨幅榜动量跟踪 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台自动运行，每 10 秒检查 │
│ ● 风控：25 项链上安全检查 + Momentum Score 评分 + 6 层退出机制 │
│ ● 特点：排名退出 > 硬止损 > 快速止损 > │
│ 追踪止损 > 时间止损 > 梯度止盈 │
├─────────────────────────────────────────────────────────────────────┤
│ D. SOL 聪明钱跟单 (Signal Tracker) │
│ 分类：MEME交易 | 作者：Ray Zhou & Cai Shuai │
│ │
│ 实时监控链上聪明钱动向，多个高质量钱包同时买入同一代币时自动跟单。 │
│ SmartMoney / KOL / Whale 三类信号，跟着最聪明的钱走。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：聪明钱信号跟单 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台自动运行，每 20 秒检查 │
│ ● 风控：MC/流动性过滤 + Dev 零容忍检查 + Bundler 操控检测 │
│ + K线追高检测 + Session 风控（连亏暂停） │
│ ● 特点：同车钱包数分级仓位 + 成本感知止盈 + 时间衰减止损 │
├─────────────────────────────────────────────────────────────────────┤
│ E. SOL Memepump 扫描 (Memepump Scanner) │
│ 分类：MEME交易 | 作者：Victor Lee │
│ │
│ 实时扫描 Pump.fun 迁移代币，TX加速 + 成交量突增 + 买压主导 │
│ 三信号共振时自动买入——捕捉安全验证后的动量爆发瞬间。 │
│ │
│ ● 支持链：Solana │
│ ● 收益来源：Pump.fun 迁移后动量爆发 │
│ ● 风险等级：⭐⭐⭐ 高（Meme 币高波动） │
│ ● 运行方式：后台自动运行，每 10 秒检查 │
│ ● 风控：服务端安全过滤 + Dev/Bundler 深度验证 + 三重信号检测 │
│ ● 特点：SCALP/MINIMUM 分档仓位 + Hot Mode 自适应 + 30min 最大持仓 │
└─────────────────────────────────────────────────────────────────────┘
请选择：输入 A ~ E
另外也支持直接操作 dApp：Aave · Morpho · Uniswap · Ethena，直接说想用哪个就行。
Step 2: User Selects Strategy or Platform
⚠️ After the user selects any strategy or dApp, you must first check whether onchainos is installed:
onchainos --version
- Not installed or version < 1.0.5 → Tell the user they need to install onchainos:
"You need to install onchainos (on-chain signing tool) first. Please follow the documentation:https://okg-block.sg.larksuite.com/docx/Cx7PdgNHLogZWIxGlwslfacIgl1 After installation is complete, run
onchainos wallet loginto log in, then continue." - Installed and version >= 1.0.5 → Continue with the routing below
| User says | Action |
|---|---|
| "A", "rebalance", "auto-rebalance", "USDC yield" | → Go to Flow A |
| "B", "grid", "grid", "grid trading" | → Go to Flow B |
| "C", "gainers list", "ranking", "ranking sniper" | → Go to Flow C |
| "D", "smart money", "signal", "copy trading", "smart money" | → Go to Flow D |
| "E", "memepump", "pump.fun", "meme scan" | → Go to Flow E |
| "both", "both", "run both" | → Explain that multiple strategies can run concurrently, guide one by one |
| "Aave", "deposit", "lending" | → Route to skills-store aave commands |
| "Uniswap", "swap tokens", "swap" | → Route to skills-store uniswap commands |
| "Ethena", "sUSDe", "staking" | → Route to skills-store ethena commands |
| Mentions a specific dApp platform | → Route to the corresponding skills-store <dapp> commands |
Flow A: USDC Smart Rebalance
Step 1: Install the strategy Skill
npx skills add purong-huang-1121/skills-store --skill strategy-auto-rebalance --yes
Step 2: Read the strategy Skill and continue guiding
After installation is complete,immediately read the strategy Skill file contents and continue guiding the user according to its instructions(no need to restart the session):
Read file: ~/.agents/skills/strategy-auto-rebalance/SKILL.md
After reading succeeds, continue executing according to the Pre-flight Checks → Post-Install Welcome order in that file.
Flow B: ETH/USDC Grid Trading
Step 1: Install the strategy Skill
npx skills add purong-huang-1121/skills-store --skill strategy-grid-trade --yes
Step 2: Read the strategy Skill and continue guiding
Read file: ~/.agents/skills/strategy-grid/SKILL.md
Flow C: SOL Ranking Sniper
Step 1: Install the strategy Skill
npx skills add purong-huang-1121/skills-store --skill strategy-ranking-sniper --yes
Step 2: Read the strategy Skill and continue guiding
Read file: ~/.agents/skills/strategy-ranking-sniper/SKILL.md
Flow D: SOL Smart Money Copy Trading (Signal Tracker)
Step 1: Install the strategy Skill
npx skills add purong-huang-1121/skills-store --skill strategy-signal-tracker --yes
Step 2: Read the strategy Skill and continue guiding
Read file: ~/.agents/skills/strategy-signal-tracker/SKILL.md
Flow E: SOL Memepump Scanner
Step 1: Install the strategy Skill
npx skills add purong-huang-1121/skills-store --skill strategy-memepump-scanner --yes
Step 2: Read the strategy Skill and continue guiding
Read file: ~/.agents/skills/strategy-memepump-scanner/SKILL.md