SuperAPI AI Directory

cli-user

General & other

View repository

Updated 10-16 02:36

About this skill

OKX Trade CLI Self Account

Use this skill when the user is working through the local OKX Trade CLI okx command.

For OKX MCP in ChatGPT, Claude Desktop, or another MCP host, use the mcp-user skill (../mcp-user/SKILL.md) instead.

AI Builder Code

For supported order-producing commands, require an AI Builder Code value:

<AI_BUILDER_CODE>

The value must be 1-16 alphanumeric characters. This is not an OKX credential. Pass the current skill's value directly to OKX Trade CLI as --aiBuilderCode <AI_BUILDER_CODE>. OKX records it on the final order for tracking and attribution. Do not set it only as a shell environment variable: the CLI reads the command flag, and another skill or terminal session may use a different AI Builder Code.

CLI Version And AI Builder Code Check

Before any credential check or order workflow, verify the installed CLI:

which okx
okx --version
okx spot place --help
okx swap place --help
okx swap close --help

Minimum CLI version for this skill:

1.4.4

Use both checks, with different severity:

  • Version check is required. Record okx --version and compare it with the published minimum version.
  • AI Builder Code check is a warning check. For the selected workflow, inspect whether the target order-producing command's help exposes --aiBuilderCode.

If okx is missing, stop and ask the user to install OKX Trade CLI. If the installed CLI is older than the published minimum version, stop before placing an order and ask the user to upgrade the CLI.

If the selected command help does not expose --aiBuilderCode, warn the user before placing an order. Do not claim that the order will be attributed through AI Builder Code unless the command accepts the flag. If the user chooses to continue with that CLI command anyway, do not invent another flag or pass raw tag.

Demo Order Workflows

Use demo mode for the example workflows:

okx --demo account balance USDT

If the credential check below resolves to API Key mode, replace --demo with the selected demo profile flags, for example --profile <demo-profile>. If the user explicitly asks for live trading, use the selected live profile flags, for example --profile <live-profile> --live, and require explicit confirmation before any order write.

Spot Open

Buy a small BTC-USDT spot amount with USDT. (API-Key mode: replace --demo with --profile <demo-profile> in the commands below — see Credential check.)

okx --demo account config --json
okx --demo account balance USDT
okx --demo market ticker BTC-USDT --json
okx --demo market instruments --instType SPOT --instId BTC-USDT --json

okx --demo spot place \
  --instId BTC-USDT \
  --tdMode <SPOT_TD_MODE> \
  --side buy \
  --ordType market \
  --sz <QUOTE_USDT> \
  --tgtCcy quote_ccy \
  --aiBuilderCode <AI_BUILDER_CODE>

Set <QUOTE_USDT> to a small amount that is above the instrument minimum and covered by trading-account USDT balance. Set <SPOT_TD_MODE> from account config acctLv: use cash for account modes 1 and 2, and cross for account modes 3 and 4. In account mode 2, use cross or isolated only when the user explicitly intends margin spot.

Verify:

okx --demo spot fills --instId BTC-USDT
okx --demo account balance BTC

Spot Close

Sell the BTC amount opened by the demo.

okx --demo account config --json
okx --demo account balance BTC
okx --demo market ticker BTC-USDT --json
okx --demo market instruments --instType SPOT --instId BTC-USDT --json

okx --demo spot place \
  --instId BTC-USDT \
  --tdMode <SPOT_TD_MODE> \
  --side sell \
  --ordType market \
  --sz <VALID_BTC_SIZE> \
  --aiBuilderCode <AI_BUILDER_CODE>

Set <VALID_BTC_SIZE> to the BTC amount represented by the same small quote amount used for Spot Open, rounded down to lotSz and capped at available BTC. Do not go below minSz. Do not default to selling the user's entire BTC balance unless the user explicitly asks for a full spot close. Set <SPOT_TD_MODE> from account config acctLv: use cash for account modes 1 and 2, and cross for account modes 3 and 4. In account mode 2, use cross or isolated only when the user explicitly intends margin spot.

Swap Open

Open a small BTC-USDT-SWAP long in demo trading from a target USDT notional. Use this workflow for linear swap instruments. Do not reuse it for inverse USD swap instruments such as BTC-USD-SWAP; those instruments have different sizing and settlement rules.

okx --demo account config --json
okx --demo account balance USDT
okx --demo market ticker BTC-USDT-SWAP --json
okx --demo market instruments --instType SWAP --instId BTC-USDT-SWAP --json

okx --demo swap place \
  --instId BTC-USDT-SWAP \
  --side buy \
  --ordType market \
  --sz <QUOTE_USDT> \
  --tgtCcy quote_ccy \
  --aiBuilderCode <AI_BUILDER_CODE>

If account config returns acctLv=1, stop: the account is in spot mode and this swap workflow is not supported. If account config returns posMode=long_short_mode, add --posSide long; otherwise omit --posSide. For swap open in acctLv=2, 3, or 4, omit --tdMode for the OKX Trade CLI default cross. Add --tdMode isolated only when the user intends isolated margin. Set <QUOTE_USDT> to a small target notional, such as 10, that is covered by trading-account USDT balance. In this OKX Trade CLI path, --tgtCcy quote_ccy makes --sz a USDT notional value; the Trade Kit converts it to a valid contract count before sending the raw OpenAPI request. Use ctVal, ticker price, minSz, and lotSz to show the approximate contract count before placing the order.

Verify:

okx --demo swap positions BTC-USDT-SWAP --json

Swap Close

Close the BTC-USDT-SWAP long opened by the demo.

okx --demo account config --json
okx --demo swap positions BTC-USDT-SWAP --json

okx --demo swap close \
  --instId BTC-USDT-SWAP \
  --mgnMode <SWAP_MGN_MODE> \
  --autoCxl \
  --aiBuilderCode <AI_BUILDER_CODE>

Set <SWAP_MGN_MODE> from the position's margin mode, usually cross or isolated. If account config returns acctLv=1, stop because there should be no swap position for this workflow. If account config returns posMode=long_short_mode, add --posSide long; otherwise omit --posSide.

Verify:

okx --demo swap positions BTC-USDT-SWAP --json

Use these as the patterns for supported order-producing CLI commands. For the broader supported command reference, read ../../docs/AI_BUILDER_CODE_SUPPORT_REFERENCE.md. Do not add AI Builder Code to other CLI commands unless the command exposes --aiBuilderCode. Do not invent alternate field names or flag names such as --ai-builder-code.

Credential And Profile Check

OKX Trade CLI can use either a local API-key profile from ~/.okx/config.toml or an OAuth session. Do not ask the user to paste OKX API keys, secret keys, passphrases, OAuth tokens, or refresh tokens into chat.

Before any authenticated command, run both checks:

okx config show --json
okx auth status --json

Apply the first matching rule:

  • If okx config show --json has any profile with a non-empty api_key, use API Key mode. Do not start OAuth just because okx auth status --json is not logged in.
  • If there is no API-key profile and okx auth status --json returns logged_in, use OAuth mode.
  • If there is no API-key profile and OAuth status is pending, wait for the login to complete before placing orders.
  • If there is no API-key profile and OAuth status is not_logged_in, ask the user for the OKX site, then run:
okx auth login --manual --site <global|eea|us|tr>

Show the verification URL and user code, then continue after the user confirms authorization.

Mode flags depend on the auth method:

Auth method Demo trading Live trading
API Key profile --profile <demo-profile> --profile <live-profile> --live
OAuth session --demo no profile flag

For API Key mode, discover available profile names and their demo settings from okx config show --json. If multiple profiles match the requested mode, ask the user which profile to use. If the selected API-key profile fails with a 401 authentication error, stop and ask the user to fix local CLI configuration; OAuth login does not override a broken API-key profile.

Workflow

  1. Confirm the user wants the CLI path.
  2. Run the CLI version and AI Builder Code check above.
  3. If the CLI is missing or older than the published minimum version, ask the user before installing or upgrading it.
  4. Run the credential and profile check above and choose mode flags.
  5. For order-producing commands that expose --aiBuilderCode, validate the current skill's AI Builder Code and pass it explicitly with --aiBuilderCode.
  6. If the selected CLI command does not expose --aiBuilderCode, warn the user that this CLI command cannot guarantee AI Builder Code attribution; do not pass raw tag or any alternate flag.
  7. Use demo mode unless the user explicitly requests live trading.
  8. Before any order write, summarize the final order parameters and wait for explicit confirmation.
  9. After an order write, verify with a read-only CLI command such as orders, fills, or positions.