warp-deploy-init-route

Warp Route Deploy Init

You are generating the initial deploy.yaml for a new Hyperlane warp route deployment.

Input

The user provides:

• Linear ticket URL or ID (required, e.g. ENG-3516 or https://linear.app/hyperlane-xyz/issue/ENG-3516/...)
• Deployer address (required — the temporary owner for all chains, e.g. 0xabc...)

If the ticket is not provided, ask for it now.

If the deployer address is not provided, ask for it before proceeding. The deployer address is always used as the owner for every owner field in the deploy.yaml (chain-level and tokenFee-level). Real ownership is set later via /warp-deploy-update-owners — never use real Safe/ICA addresses in this step.

Multi-protocol deployer addresses: if the route spans multiple VM protocols (e.g. EVM + Sealevel), each protocol requires its own deployer address with a different format (EVM: 0x..., Solana: base58). In this case, ask for a separate deployer address per protocol and use:

• The EVM deployer address as owner on all EVM chains
• The Sealevel deployer address as owner on all Sealevel chains (Solana, Eclipse)
• The Cosmos deployer address as owner on all Cosmos chains (if applicable)

If the route spans multiple VM protocols and only one deployer address was given, check whether it matches the expected format for each protocol — if not, ask for the missing addresses.

---

Step 1: Fetch the Linear Ticket

Extract the issue ID from the URL or input (e.g. ENG-3516).

Query the Linear GraphQL API:

curl -s -X POST https://api.linear.app/graphql \
  -H "Authorization: $LINEAR_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"query": "{ issue(id: \"<ISSUE_ID>\") { title description } }"}'

If LINEAR_API_KEY is not set or returns 401: Stop and tell the user:

LINEAR_API_KEY is not set or invalid. Please export it in your shell: export LINEAR_API_KEY=<your-key> and restart Claude Code, then try again.

Show the user the ticket title and description before proceeding.

---

Step 2: Extract Warp Route Details

Parse the ticket description to extract the following. Ask the user to clarify anything that is ambiguous or missing:

Field	Description
Token name	Full name (e.g. RISE)
Token symbol	Symbol (e.g. RISE)
Decimals	Token decimals (e.g. 18) — use the reference table below for USDC; query on-chain if unsure
Collateral chain(s)	Chain(s) where the real token lives — may be multiple for multi-collateral routes
Collateral token address(es)	ERC-20 contract address per collateral chain — use the reference table below for USDC
Synthetic chains	Chains that get a synthetic (bridged) representation
Warp fee	Fee in basis points (bps), if specified (e.g. 6bps)
Fee owner	Address that receives fees — defaults to the chain's owner if not specified
Type overrides	Any chain that should be native instead of collateral/synthetic
Yield route type	If the ticket mentions yield/ERC4626/vault, determine the yield subtype (see below)

Yield routes: if the ticket mentions "yield", "ERC4626", "vault", "rebasing", "Aave", or the token is a known yield-bearing token (sUSDS, sDAI, etc.), it is a yield route. There are two subtypes:

Ticket language	Collateral type	Synthetic type	Behavior
"owner yield" / "non-rebasing"	collateralVault	synthetic	Yield accrues to contract owner; owner calls sweep() to claim
"rebasing" / yield distributed to holders	collateralVaultRebase	syntheticRebase	Yield auto-distributes to all bridged token holders via exchange rate updates

If the ticket says "owner yield", use collateralVault + synthetic. If ambiguous, ask the user.

For collateralVault routes — check if the collateral token already implements ERC4626:

Run this check on the collateral token address from the ticket:

cast call <collateral-token-address> "asset()(address)" --rpc-url <RPC_URL>

• If asset() returns a non-zero address → the token IS an ERC4626 vault. Use it directly as token in the deploy.yaml. No vault deployment needed.

• If asset() reverts or returns zero → the token is a plain ERC20. Warn the user:

  ⚠️ The collateral token does not implement ERC4626. You must deploy an Aave ERC4626 vault wrapping it first using hyperlane-xyz/Aave-Vault, then replace <VAULT_ADDRESS> in the deploy.yaml with the deployed vault address. The vault owner controls who can sweep() yield — confirm the yield beneficiary with product before deploying.

  Real example: WETH/incentiv vault 0xB1ea329f0B79d0b213957569594ca2a9dE637215 = "Wrapped Aave Ethereum WETH" (waEthWETH), underlying = WETH 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2

  Use <VAULT_ADDRESS> as a placeholder in the deploy.yaml until the vault is deployed.

collateralVaultRebase constraint: ALL destination chains MUST be syntheticRebase — you cannot mix syntheticRebase with synthetic in the same route. Each syntheticRebase chain requires a collateralChainName field pointing to the collateral chain.

Multi-collateral routes: when the ticket lists multiple collateral chains, each gets its own token address. All owner fields use the deployer address — real ICA/multisig addresses are set later in /warp-deploy-update-owners.

Rebalancing: if the ticket includes liquidity weights (e.g. 35% ethereum, 20% arb…), the route uses the rebalancer. Add allowedRebalancers and allowedRebalancingBridges to each collateral chain (not synthetic). Use the hardcoded values in the reference tables below — no need to search the registry. The weights themselves are NOT in the deploy.yaml — they go in typescript/infra/config/environments/mainnet3/balances/desiredRebalancerBalances.json in the monorepo. Flag this to the user as a separate step.

---

Reference: Known Token Addresses and Bridge Contracts

USDC (decimals: 6)

Chain	Token Address
ethereum	0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48
arbitrum	0xaf88d065e77c8cC2239327C5EDb3A432268e5831
base	0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913
optimism	0x0b2C639c533813f4Aa9D7837CAf62653d097Ff85
polygon	0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359
avalanche	0xB97EF9Ef8734C71904D8002F8b6Bc66Dd9c48a6E
unichain	0x078D782b760474a361dDA0AF3839290b0EF57AD6
linea	0x176211869cA2b568f2A7D4EE941E073a821EE1ff
worldchain	0x79A02482A880bCE3F13e09Da970dC34db4CD24d1
hyperevm	0xb88339CB7199b77E23DB6E890353E22632Ba630f
ink	0x2D270e6886d130D724215A266106e6832161EAEd

Rebalancer

Single rebalancer address used across all multi-collateral routes:

0xa3948a15e1d0778a7d53268b651B2411AF198FE3

CCTP Bridge Addresses (per source chain)

Used in allowedRebalancingBridges on each collateral chain. The two addresses are the CCTP bridge contracts on that source chain — list them for every destination collateral chain in the route.

Source Chain	Bridge Address 1	Bridge Address 2
ethereum	0x8c8D831E1e879604b4B304a2c951B8AEe3aB3a23	0x7A576Bb5291567cfDbB4585B1911CF7C9891ea07
arbitrum	0x4c19c653a8419A475d9B6735511cB81C15b8d9b2	0xE086378F7f0afd5C3ff95E10B5e7806a0901b33f
base	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0x31169ee5A8C0D680de74461d7B5394fFc7C3576B
optimism	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0x4eFaacbf0D3d57b401Cb6B559e84b344448b0C30
polygon	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0x07d89DE0F7E18c9bcAAE81F44aee9CA02EBeE872
avalanche	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0xCB35d7730843F770625bE36A0E4228c17fDcBC09
unichain	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0xCB35d7730843F770625bE36A0E4228c17fDcBC09
linea	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0x89aAa89D36F995b41d929f2D29b8Ee7C9c8e54cA
worldchain	0x33e94B6D2ae697c16a750dB7c3d9443622C4405a	0x89aAa89D36F995b41d929f2D29b8Ee7C9c8e54cA
hyperevm	0xDdf252a063f8c5C399B9ccDBbaDBA55225F53Da1	0xe10b7b030C75C80359841CB0ec892E233F03f145
ink	0x92dFEB6f7Daa532de0F3c75c2091e1607c6593b7	0x70CF23d09784fCA62be304c928BCA9F1801B1F21

Source: extracted from deployments/warp_routes/USDC/eclipsemainnet-deploy.yaml (2025-04-02). If a chain is missing from this table, look it up in that file.

---

Step 3: Look Up Mailbox Addresses

For each chain (collateral + synthetics), read the mailbox address from the local registry:

REGISTRY_PATH="$(pwd)/../hyperlane-registry"
cat "$REGISTRY_PATH/chains/<chain>/addresses.yaml" | grep "^mailbox:"

If a chain is not found in the registry, warn the user — the chain may not have a Hyperlane deployment yet.

For Sealevel chains (solanamainnet, eclipsemainnet): also look up the IGP address from the monorepo's program-ids.json (NOT from addresses.yaml):

cat "rust/sealevel/environments/mainnet3/<chain>/core/program-ids.json" | python3 -c "import sys,json; print(json.load(sys.stdin)['igp_program_id'])"

Known values (verify against the file before using):

Chain	igp_program_id
solanamainnet	BhNcatUDC2D5JTyeaqrdSukiVFsEHK7e3hVmKMztwefv
eclipsemainnet	Hs7KVBU67nBnWhDPZkEFwWqrFMUfJbmY2DQ4gmCZfaZp

Save this address — it is used as the hook field in Step 4.

---

Step 4: Generate deploy.yaml

Compose the deploy.yaml using the extracted details and mailbox addresses.

Multi-collateral format (multiple collateral chains + one synthetic): same as standard but repeated for each collateral chain, each with its own token address and owner:

<collateral-chain-1>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <token-name>
  owner: '<owner-or-ica-address>'
  symbol: <token-symbol>
  token: '<token-address-on-this-chain>'
  type: collateral

<collateral-chain-2>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <token-name>
  owner: '<owner-or-ica-address>'
  symbol: <token-symbol>
  token: '<token-address-on-this-chain>'
  type: collateral

<synthetic-chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <token-name>
  owner: '<owner-or-ica-address>'
  symbol: <token-symbol>
  type: synthetic

The tokenFee on the synthetic chain lists ALL collateral chains in feeContracts (each may have a different owner if per-chain ICAs differ).

Standard format (single collateral + synthetic chains):

<collateral-chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <token-name>
  owner: '<owner-address>'
  symbol: <token-symbol>
  token: '<token-contract-address>'
  type: collateral

<synthetic-chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <token-name>
  owner: '<owner-address>'
  symbol: <token-symbol>
  type: synthetic

For collateralVault type chains (owner-yield ERC4626 — yield accrues to owner, not holders):

⚠️ Vault must be deployed before the warp route. The token field is the ERC4626 vault address, NOT the underlying asset. Use hyperlane-xyz/Aave-Vault to deploy the vault if one doesn't already exist. Real-world examples: WETH/incentiv vault 0xB1ea329f0B79d0b213957569594ca2a9dE637215 (waEthWETH, wraps WETH), USDT/incentiv vault 0x04DA4b99FFc82f0e44DEd14c3539A6fDaD08E2fE (wraps USDT).

Name and symbol: use the name and symbol of the underlying asset (from asset()), NOT the vault token. The vault is an implementation detail; users think of themselves as bridging the underlying token. Look up the underlying's name/symbol on-chain:

ASSET=$(cast call <vault-address> "asset()(address)" --rpc-url <RPC_URL>)
cast call $ASSET "symbol()(string)" --rpc-url <RPC_URL>
cast call $ASSET "name()(string)" --rpc-url <RPC_URL>

The warp route directory and warp route ID also use the underlying asset symbol (e.g. WETH/igra, not waEthWETH/igra).

<collateral-chain>:
  decimals: <decimals> # decimals of the underlying asset
  gas: 300000 # REQUIRED: vault withdrawal costs more than default 68k gas
  mailbox: '<mailbox-address>'
  name: <underlying-asset-name> # from asset().name(), NOT vault name
  owner: '<owner-address>'
  symbol: <underlying-symbol> # from asset().symbol(), NOT vault symbol
  token: '<erc4626-vault-address>' # vault address — NOT the underlying asset address
  type: collateralVault

<synthetic-chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <underlying-asset-name>
  owner: '<owner-address>'
  symbol: <underlying-symbol>
  type: synthetic # standard synthetic — NOT syntheticRebase

⚠️ gas: 300000 is required on the collateralVault chain. Delivering to a collateralVault triggers an ERC4626 vault withdrawal, which costs ~430k gas — far above the default 68k destinationGas. Without this override the relayer underpays the IGP and the delivery transaction will revert. 300k was validated empirically on the WETH/igra route (required: ~430k total, IGP overhead: ~160k, so destinationGas needed: ~270k → 300k gives headroom).

For collateralVaultRebase type chains (rebasing ERC4626 — yield auto-distributes to all bridged holders):

⚠️ Same ERC4626 check as collateralVault: run cast call <token> "asset()" — if it returns a non-zero address, use the token directly; if it reverts, a vault must be deployed first. Same name/symbol rule applies: use the underlying asset's name and symbol.

<collateral-chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <underlying-asset-name>
  owner: '<owner-address>'
  symbol: <underlying-symbol>
  token: '<erc4626-vault-address>'
  type: collateralVaultRebase

<synthetic-chain>:
  collateralChainName: <collateral-chain> # REQUIRED for syntheticRebase
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  name: <underlying-asset-name>
  owner: '<owner-address>'
  symbol: <underlying-symbol>
  type: syntheticRebase # ALL destinations must be syntheticRebase when collateralVaultRebase is used

For native type chains (chain's native gas token is being bridged — no token, name, or symbol field):

<chain>:
  decimals: <decimals>
  mailbox: '<mailbox-address>'
  owner: '<owner-address>'
  type: native

If a warp fee is specified, fee placement depends on route type:

• Standard routes (collateral/native → synthetic): tokenFee on the synthetic chain only. feeContracts lists all collateral/native chains. Fee is charged when bridging FROM synthetic TO collateral/native.
• All-native routes (every chain is native): tokenFee on every chain, each listing all other chains as feeContracts.
• Multi-collateral with rebalancer: tokenFee on the synthetic chain listing all collateral chains (user-facing fee for bridging out of synthetic). Rebalancer-internal fees between collateral chains are NOT part of initial deploy — added later if needed.

<synthetic-chain>:
  ...
  tokenFee:
    feeContracts:
      <collateral-or-native-chain>:
        bps: <fee-in-bps>
        owner: "<fee-owner-address>"
        type: LinearFee
    owner: "<fee-owner-address>"
    type: RoutingFee
  type: synthetic

The fee-owner-address defaults to the chain's owner unless separately specified.

Sealevel chain rules (solanamainnet, eclipsemainnet, etc.): For any Sealevel chain in the route, add extra fields depending on token type:

All Sealevel chains (any type):

• hook: the IGP address looked up in Step 3 (from program-ids.json, NOT addresses.yaml)
• gas: 300000: sending to Solana costs more than the default 68k gas

Sealevel synthetic chains only (additional required fields):

• decimals: Solana SPL tokens are capped at 9 decimals. If the collateral token has more than 9 decimals (e.g. 18 on EVM), set decimals: 9 on the Sealevel synthetic and add scale: 1000000000 (i.e. 10^(collateral_decimals - 9)). For 6-decimal tokens (e.g. USDC), use decimals: 6 with no scale needed.

• metadataUri: a URL that will be stored in the Token 2022 on-chain metadata extension. This is never fetched at deploy time — any valid URL works, including a placeholder. The URI length affects rent (longer = marginally more SOL needed). Use the registry raw URL pattern so it resolves correctly after the registry PR is merged:

  https://raw.githubusercontent.com/hyperlane-xyz/hyperlane-registry/main/deployments/warp_routes/<TOKEN>/metadata.json
  

  Also create a metadata.json file next to the deploy.yaml in the registry:

  {
    "name": "<TOKEN_NAME>",
    "symbol": "<TOKEN_SYMBOL>",
    "image": "https://raw.githubusercontent.com/hyperlane-xyz/hyperlane-registry/main/deployments/warp_routes/<TOKEN>/logo.svg"
  }
  

  This JSON is the Metaplex-compatible metadata that Solana wallets (Phantom, etc.) use to display the token. If an SVG logo is attached to the Linear ticket, reference it via the registry raw URL.

Example (collateral has 18 decimals → Solana synthetic uses 9 with scale):

solanamainnet:
  decimals: 9
  gas: 300000
  hook: '<igp-address-from-registry>'
  mailbox: '<mailbox-address>'
  metadataUri: 'https://raw.githubusercontent.com/hyperlane-xyz/hyperlane-registry/main/deployments/warp_routes/TOKEN/metadata.json'
  name: TOKEN
  owner: '<solana-owner-address>'
  scale: 1000000000
  symbol: TOKEN
  type: synthetic

Example (collateral has 6 decimals → Solana synthetic uses 6, no scale needed):

solanamainnet:
  decimals: 6
  gas: 300000
  hook: '<igp-address-from-registry>'
  mailbox: '<mailbox-address>'
  metadataUri: 'https://raw.githubusercontent.com/hyperlane-xyz/hyperlane-registry/main/deployments/warp_routes/TOKEN/metadata.json'
  name: TOKEN
  owner: '<solana-owner-address>'
  symbol: TOKEN
  type: synthetic

Rules:

• Chains are listed in alphabetical order
• token field only present on collateral, collateralVault, and collateralVaultRebase types
• name and symbol omitted on native type; decimals IS included
• collateralChainName is REQUIRED on every syntheticRebase chain; omit on all other types
• tokenFee goes on the synthetic chain only (or all chains if all-native route)
• Do NOT include interchainSecurityModule, proxyAdmin, or remoteRouters — those are added post-deployment

---

Step 5: Determine Output Path

The deploy.yaml goes in the local registry at:

$REGISTRY_PATH/deployments/warp_routes/<TOKEN>/<new-chain>-deploy.yaml

Where:

• <TOKEN> is the token symbol (uppercase)
• <new-chain> is the primary new destination chain — i.e., the new chain being added, typically the synthetic chain. Do NOT include all chains in the filename; using only the new chain creates a stable ID that doesn't change when additional chains are added later.

Example: for USDS bridging from ethereum (collateral) to igra (synthetic), the file is deployments/warp_routes/USDS/igra-deploy.yaml — NOT ethereum-igra-deploy.yaml.

Exception: if there is no clear "primary" new chain (e.g., both chains are new/co-equal), use just the synthetic or destination chain name.

Check if a directory and/or file already exists. If it does, show the user the existing file and ask if they want to overwrite.

---

Step 6: Write the File

Write the deploy.yaml to the registry path, then show the user the final content and full path.

Ask the user: "Does this deploy.yaml look correct? Type yes to proceed to deployment, or describe any changes needed."

Do not proceed to Step 7 until the user confirms.

---

Step 7: Prepare Warp Deploy Command

7a: Determine Warp Route ID

The warp route ID is derived from the deploy.yaml output path:

$REGISTRY_PATH/deployments/warp_routes/<TOKEN>/<new-chain>-deploy.yaml
                                        └─────────────────────────────┘
                                        Warp route ID = <TOKEN>/<new-chain>

Example: if the file is deployments/warp_routes/USDS/igra-deploy.yaml, the warp route ID is USDS/igra.

The stable warp route ID uses only the primary new chain name (not all chains), so it stays constant if more chains are added to the route later.

7b: Identify Required Protocols

For each chain in the route, determine its VM protocol type:

Protocol	Example chains	Key flag
EVM (ethereum)	ethereum, arbitrum, base, optimism, polygon, avalanche, bsc	--key.ethereum
Sealevel	solana, eclipsemainnet	--key.sealevel
Cosmos	neutron, osmosis	--key.cosmos
Starknet	starknet	--key.starknet

If all chains are EVM, only one key is needed. If the route spans multiple VM types, a separate key flag is needed per protocol.

7c: Ask for Key Environment Variables

For each unique protocol needed, ask the user:

What environment variable holds your deployer private key for {protocol} chains? (Press enter to use the default: HYP_KEY for single-protocol routes, or HYP_KEY_{PROTOCOL} for multi-protocol)

Use the provided variable name(s) to build the command.

7d: Build and Show the Command

Assemble the full deploy command. The command must be run from typescript/cli. Always include --yes to skip the interactive confirmation prompt.

Note: The HTTP registry must be running before executing this command (started in Step 8). Start it first, then use its URL here.

cd /path/to/hyperlane-monorepo/typescript/cli && pnpm hyperlane warp deploy \
  --registry http://localhost:<port> \
  --warp-route-id <TOKEN>/<new-chain> \
  --key.ethereum $MY_ETH_KEY_VAR \
  [--key.sealevel $MY_SOL_KEY_VAR]   # only if sealevel chains present
  [--key.cosmos $MY_COSMOS_KEY_VAR]   # only if cosmos chains present
  --yes

Where <TOKEN>/<new-chain> is the warp route ID from Step 7a, <port> is the HTTP registry port (typically 3333), and $MY_ETH_KEY_VAR etc. are the env variable names provided in 7c.

Show the user the exact command with env variable names substituted (e.g. $MY_ETH_KEY_VAR), never key values. Then ask:

Ready to run the warp deploy? Type yes to execute, or no to run it manually.

---

Step 8: Run Warp Deploy

If the user confirms, first start the HTTP registry in the background to get private RPC URLs from Secret Manager:

cd <MONOREPO_ROOT> && pnpm -C typescript/infra start:http-registry --writeMode

Run with run_in_background: true. Wait for the server to be ready by checking the logs for a line like Listening on http://localhost:<port>. Note the port (typically 3333) and the background task/shell ID — you will need both to stop the server after the skill completes.

Tell the user upfront:

Starting warp deploy for <TOKEN>/<new-chain>. This deploys contracts on each chain sequentially and typically takes 5–15 minutes. Chains: <list all chains> You'll see the full output when it completes.

Then run the deploy command from typescript/cli. Use only the HTTP registry — it is started with --writeMode so it handles both private RPC reads and artifact writes. Always include --yes:

cd /path/to/hyperlane-monorepo/typescript/cli && pnpm hyperlane warp deploy \
  --registry http://localhost:<port> \
  --warp-route-id <TOKEN>/<new-chain> \
  --key.ethereum $MY_ETH_KEY_VAR \
  --yes

On success: the CLI writes a <new-chain>-config.yaml file next to the deploy.yaml in the registry. Show the user the full deploy output so they can see which contracts were deployed and their addresses.

On failure: show the error output and stop the HTTP registry (Step 8a), then do not proceed to Step 9. Common issues:

• Insufficient gas → run /warp-deploy-fund-deployer first
• RPC errors → check the chain's RPC URL in the registry
• Key not set → confirm the env variable is exported in the shell

---

Step 9: Warp Send Test

Run the send test now, while the deployer still owns the contracts — before transferring ownership in Step 10.

Use the same key environment variable from Step 7c (no need to ask again).

Amount calculation

Always use --amount 10000 (in token's smallest units, i.e. wei-equivalent). This is small enough to stay well within any warp fee budget across all legs.

Warp fee accounting: if the route has a fee (e.g. 10 bps on withdrawals), the CLI charges amount + fee from the sender's balance on the fee leg. After the forward send mints 10000 synthetic tokens on the destination, the return leg needs 10000 + fee in the synthetic balance. With --amount 10000 and 10 bps fee:

• fee = 10000 * 10 / 10000 = 10 units
• total needed = 10010 — but the deployer only received 10000 from the forward send

To avoid this, use --amount 9000 on the return leg (synthetic → collateral/native), which leaves headroom for the fee:

• fee = 9000 * 10 / 10000 = 9 units → total needed = 9009 ≤ 10000 ✓

If the fee bps is known upfront, calculate the safe return amount as: floor(forward_amount / (1 + fee_bps / 10000)). With no fee, use the same amount in both directions.

For native collateral chains: the IGP payment for each outbound send also costs native gas. Ensure the deployer has enough native token before running all sends — the preflight check only covers deploy gas, not IGP gas per send. If "Insufficient for interchain gas" appears, top up and retry.

Two-chain routes

Send forward then back. Use the amounts from the calculation above:

cd /path/to/hyperlane-monorepo/typescript/cli

# Forward (no fee on this direction for standard routes)
pnpm hyperlane warp send \
  --registry http://localhost:<port> \
  --origin <chain1> --destination <chain2> \
  --amount 10000 --key $MY_PK \
  -w <TOKEN>/<new-chain>

# Return (fee charged — use reduced amount)
pnpm hyperlane warp send \
  --registry http://localhost:<port> \
  --origin <chain2> --destination <chain1> \
  --amount 9000 --key $MY_PK \
  -w <TOKEN>/<new-chain>

Multi-chain routes (1 native/collateral + multiple synthetics)

Do NOT use --round-trip. Test each native ↔ synthetic pair sequentially:

cd /path/to/hyperlane-monorepo/typescript/cli

# For each synthetic chain: send native → synthetic (forward, no fee)
pnpm hyperlane warp send \
  --registry http://localhost:<port> \
  --origin <native-chain> --destination <synthetic-chain> \
  --amount 10000 --key $MY_PK \
  -w <TOKEN>/<new-chain>

# Then return: synthetic → native (fee charged — use reduced amount)
pnpm hyperlane warp send \
  --registry http://localhost:<port> \
  --origin <synthetic-chain> --destination <native-chain> \
  --amount 9000 --key $MY_PK \
  -w <TOKEN>/<new-chain>

Skip any leg where the deployer has insufficient balance. After each forward send from a native chain, check the native balance — IGP payments accumulate across sends.

Each send may take a few minutes to relay. After each send, show the user:

• Whether it succeeded or failed
• The Message ID (from the CLI output)
• The Explorer link (e.g. https://explorer.hyperlane.xyz/message/<id>)

If either send fails or times out, show the error and still report the message ID if available so it can be tracked. Do not block on failures — proceed when ready.

After all sends complete (or on any failure)

Stop the HTTP registry:

# Kill the background process started in Step 8 using its shell/task ID

Use TaskStop or KillShell with the ID noted when starting the registry. Always stop it — even if sends failed — so no background process is left running.

---

Next Steps

Once Step 9 is complete, run /warp-deploy-update-owners to transfer ownership, add the CoinGecko ID, and open the registry PR.

---

Notes

• The registry path is $(pwd)/../hyperlane-registry when run from the monorepo root. The hyperlane-registry repo is expected to be cloned at the same level as hyperlane-monorepo.
• For USDC, use the token addresses and CCTP bridge addresses from the reference tables above — no need to search the registry
• If the ticket has links to token contracts on block explorers, use those addresses
• All owner fields always use the deployer address — never use real Safe/ICA addresses in deploy.yaml. Real ownership is transferred via /warp-deploy-update-owners after testing.
• Do NOT search the registry for example deploys to copy from — the reference tables above have the canonical values