SuperAPI AI Directory

wind-turbine-dwg-layout

General & other

View repository

Updated 10-16 09:56

About this skill

Wind Turbine DWG Point Layout

Batch-write the turbine positions from the coordinate point DWG into a new copy of the base map. Each turbine position must consist of three independent objects:

  1. fj Wind turbine schematic block;
  2. the 25×25 small box below the wind turbine;
  3. HD数字# formatted number, for example HD2#。

Input Requirements

  • PointDwg: contains POINT entities and corresponding numeric text turbine position coordinate file. The text should coincide with the point or be within the matching tolerance, and the number must be unique.
  • BaseDwg: the base map to be overlaid. The base map must use the same coordinate system and the same units as the coordinate point file.
  • OutputDwg: a new output path, which must not be the same as either input file and must not be an existing file.

Do not automatically guess or perform coordinate transformation. If the coordinate systems, central meridians, or units of the two DWGs are inconsistent, stop first and explain that the user needs to confirm the transformation parameters.

Execution Method

Requires AutoCAD to be installed and open on Windows. Run:

powershell -NoProfile -ExecutionPolicy Bypass -File scripts/apply_wind_turbine_layout.ps1 `
  -PointDwg "C:/path/机位坐标.dwg" `
  -BaseDwg "C:/path/新底图.dwg" `
  -OutputDwg "C:/path/新底图_IB风机布置.dwg"

Optional parameters:

  • -LabelPrefix "HD": number prefix, default HD。
  • -LabelSuffix "#": number suffix, default #。
  • -MatchTolerance 0.5: the maximum matching distance between the point and the numeric text, default 0.5 drawing units.
  • -AllowTextOnly: only when the source file completely has no POINT , allow directly using the numeric text insertion point; not allowed by default.

On success, the script outputs JSON, and status must be validated. Before delivering to the user, check the object quantity and input file hash verification results in it.

Built-in Standard Style

  • assets/ib-fj-template.dwg: preserve fj the block's real wind turbine geometry and dependencies.
  • assets/ib-label-template.dwg: preserve HZ text style, color, and MText format.
  • assets/ib-style.json: record the wind turbine layer, number offset, and box geometry parameters.

The default style originates from 初步布置图1013.dwg:

  • fj placed on IB风机布置 layer, insertion point strictly equal to the turbine position coordinate;
  • the box is placed on mainlayer, size 25×25, preserving the standard center offset, color, and lineweight;
  • the number is placed on mainlayer, following the template MText format, with the number content replaced by HD数字#。

Quality Gate

Only when all of the following conditions are met can it be reported as complete:

  • the generated fj, box, and number quantities are all equal to the number of valid turbine positions;
  • each fj insertion point is consistent with the source turbine position coordinate;
  • each box size is 25×25, and the style parameters are consistent with the built-in configuration;
  • each source number corresponds to exactly one HD数字# number;
  • the SHA-256 hashes of both input DWGs remain unchanged before and after the run;
  • the output DWG has been successfully saved as a new file.

Any verification failure should be clearly reported as an error; do not treat an unverified file as a completed result. Failure cleanup may only delete the output copy just created by this run, and must not delete or modify the input files.