gitbutler-stacks

GitButler stacks (Agenta)

Everyday but usage — but status, but commit, but push, but absorb — is covered by the root AGENTS.md. This skill is the multi-lane layer: it only matters once you have a stack of branches, which is roughly 6% of the work here.

Read the first rule first. Most of what follows exists to undo damage that only happens when edits are made first and assigned to lanes afterward. Committing each change to its lane as you go avoids nearly all of it.

Prefer one lane at a time

Land a lane before starting the next. A single lane per session needs none of the machinery below — no --only staging discipline, no stash isolation, no oplog restores. Reach for a stack only when a change genuinely depends on another in-flight branch's commits.

Sync a lane with rebase, not merge. Merge commits between branches are what collapse a series (see the first hard-won gotcha).

Committing to specific lanes in a stack (the part that bites)

Changes are assigned to the stack, not to an individual branch. but rub <file> <branch> and but commit <branch> --only both operate on the stack's assigned-changes set — --only commits whatever is currently assigned to the named branch, regardless of which branch name you used when staging. So:

• Never pre-stage multiple lanes' files and then commit them one lane at a time. The first but commit --only sweeps the entire assigned set into that one branch (the others end up empty or scrambled). Instead, work one lane at a time: assign exactly that lane's files → but commit <branch> --only → verify → then assign the next lane's files. Keep the assigned set equal to exactly one lane's files at each commit.
• Verify every commit immediately: git show --stat --name-only <branch>. If a file from another lane leaked in, stop and fix before continuing.
• but rub by path goes stale after any mutation. Every but mutation kicks a background sync that invalidates the path index, so the next path-based but rub <path> ... often fails with "Source '' not found". Use the stable cliId instead (the 2-4 char code in but status / but status --json): but rub <cliId> <target>. cliIds survive across the sync; paths don't.
• Splitting one file across two stacked lanes (e.g. routers.py where the lower lane owns half the edit and the upper lane the other half): you cannot split mixed hunks reliably. Instead use sequential working-tree states — make the file the lower lane's version, commit it to the lower lane; then edit the file to add the upper lane's delta and but rub <fileCliId> <upperCommitCliId> to amend that delta into the upper commit.
• The branch ref can diverge from the workspace-applied commit mid-session (after absorb/amend/rebase). The working tree is the source of truth; but push pushes the applied state. Don't panic if git diff <branch> -- <file> shows a delta while git status is clean — verify against git show "<branch>:<file>" and re-push.

Spreading a pile of edits back across an existing stack (the reliable way)

When you have a working tree full of changes that belong to many lanes of an already-pushed stack (e.g. a review-pass that fixes files across wp0…wp4), do NOT try to assign-and-commit lane by lane against the live working tree — but rub/but commit --only/but absorb all route by hunk dependency across the whole stack, and they mis-route in three predictable ways that scramble the stack and waste hours:

• New (untracked) files ignore the target branch. but rub <newFileCliId> <lowerLane> dumps every untracked file into the topmost lane's staging group, not the one you named. New files cannot be assigned to a lower lane at all.
• but absorb sends anything it can't attribute to the docs/top lane. Renamed files, new files, and hunks in line-regions the target lane's original commit never touched all fall to the "last commit in the primary lane" fallback — silently the wrong lane.
• A multi-hunk file whose hunks belong to different commits won't commit whole. but commit <lane> / -p <file> commits the attributable hunks and drops the rest ("Warning: Some selected changes could not be committed"), often leaving an empty no-change commit. Splitting one file across lower+upper lanes is the §"Splitting one file across two stacked lanes" case above.

The technique that actually works — git-stash isolation, one lane at a time:

1. but oplog snapshot -m "pristine" then git stash push -u everything. Working tree clean, every lane back at its remote tip. This snapshot is your only safe recovery point — but oplog restore it whenever a step scrambles the stack (it does, often).
2. For each lane, restore only that lane's files into the clean tree: tracked-modified from git checkout 'stash@{0}' -- <paths>; untracked/new files from the stash's untracked parent git checkout 'stash@{0}^3' -- <paths>; reproduce deletes/renames with git rm. Verify with git status that ONLY that lane's files are present — nothing else.
3. Land them: if every hunk dependency-attributes cleanly to existing commits in that lane (and the lane below), a blanket but absorb (no source — the tree holds only this lane's files, so there's nothing to mis-route) puts each hunk in the right commit. If the lane needs new files, use but commit <lane> instead (the new files have only this lane to land in because the tree is isolated).
4. Verify the lane's tip TREE, not the diff (commit history within a lane doesn't matter; the resulting tree does): git show <lane>:<file> for each touched file, plus git ls-tree -r <lane> <dir> for moves/deletes. Then check the lanes above it for resurrected deletes / phantom files (the rebase re-materializes deleted dirs as untracked — rm -rf that residue; it's noise, the tip tree is authoritative).
5. Next lane. Push at the very end with but push <lane> -f and confirm every lane's git rev-parse <lane> == git ls-remote origin <lane>.

Unrelated fixes that depend on nothing in the stack (e.g. a stale test for code already on main) go on their own parallel lane: isolate just that file, but commit -c <newlane>.

Stacks are linear; a fan-out is expressed through PR bases, not graph shape

A GitButler stack is a linear series. but branch new <name> --anchor <parent> does NOT create a sibling of <parent> — it inserts the new branch into the line on top of it. So anchoring two branches on the same parent produces parent → first → second, not two children of parent. but branch new <name> with no anchor makes a separate parallel stack, but a parallel stack branches off the workspace base (main), so a branch that genuinely depends on an ancestor's commits can't live there with a clean diff.

This matters when a design's dependency tree fans out (e.g. a web lane and an SDK lane that both depend on an API lane but not on each other). You cannot draw that fan-out in the git graph here. You don't need to. The clean per-PR diff is a PR-base property, not a graph-shape property: a stacked branch contains every commit below it, and GitHub shows only the delta against the base you set. So put everything in one linear stack in dependency order and set each PR's base to the branch directly below it. Order independent lanes however you like (sort by fewest conflicts); lanes that touch disjoint files (e.g. web/** vs api/**) can sit anywhere in the line.

• Build the line with but move <branch> <target-branch> (stacks <branch> on top of <target>) and but move <branch> zz (tears <branch> off into its own parallel stack). Use these to reorder after the fact; take a but oplog snapshot first.
• Verify the line by diffing, not by eyeballing the tree. For each branch, run git diff --name-only <base>..<branch> where <base> is the branch below it. The file list must be exactly that lane's files. If a lower lane's files appear, the order is wrong (a lane got inserted into another's ancestry) — but move it out of the way and re-diff.
• A branch torn off to its own parallel stack (base = main) gives a wrong diff against an ancestor branch: git diff <ancestor>..<torn-off> reverses the ancestor's own changes (their merge base is main). That's the tell that the branch needs to be stacked, not parallel.
• Set PR bases to match: bottom lane --base main, every other lane --base <branch-below-it>.

Hard-won gotchas (don't relearn these)

• GitButler series need linear history. A stack of branches connected by git merge commits (e.g. branches synced by merging a release in) can collapse to a single series (the tip) when unapplied/re-applied — the intermediate branches stop being addressable and you can't but commit to them. Prefer GitButler's own stacking over merging branches into each other.
• Don't sync a behind lane with unapply → git branch -f origin/<b> → apply. Pointing a series at a merge-based origin ref flattens the stack. There is no clean "fast-forward this series to its own remote" in the CLI when origin is merge-based and ahead.
• but pull rebases applied branches on the TARGET (main), not on each branch's own upstream. It will not advance a series to origin/<that-branch>.
• Recovery: but oplog list then but oplog restore <sha> rewinds the whole workspace (including uncommitted changes) to any prior snapshot — this is how you undo a botched unapply/apply and get a collapsed stack's series back. Take a but oplog snapshot -m "..." before risky operations.
• A dropped-hunk commit can damage the working tree, not just the commit. When but commit --only warns "Some selected changes could not be committed", check the FILE in the tree afterwards, not only the commit: the reconcile can rewrite the working copy and silently lose the uncommitted hunks. Recover the exact bytes from a snapshot's worktree subtree: git cat-file -p <oplog-sha>:worktree/<path> (every oplog entry stores one).
• Hunks land on the lane whose commits own their line regions — put the file there instead of fighting. If a file's edits sit in regions a higher lane's commit created, committing them to the lower lane drops them and but absorb amends the higher lane's commit anyway (and an absorb that amends a LOWER commit can leave a {conflicted} commit above it; if that happens, restore the snapshot rather than uncommitting around it). Keep code and its tests together on whichever lane attribution chooses.
• Parse cliIds from but status --json (filePath/cliId pairs), never by grepping the human output — the graph art breaks naive extraction and a wrong token silently rubs the wrong thing. Commit cliIds also rotate after every background sync, so re-read them in the same breath as the command that uses them.
• Lane a test with the half that appears LAST, not the half you were thinking about. A test that drives two halves (a DAO and its wrapper, an API parser and the SDK catalog) fails in isolation on every lane between them if it lands below the upper half — and a green local run proves nothing, because the working tree has all lanes applied. The cheap check before landing any new test file: ask which lane's tip FIRST contains every symbol the test touches, and put the test there. (Three instances in one day before this rule.)
• Remote-tracking refs go stale under but push and lie convincingly. git show <remote>/<branch>:<file> can show old content long after the push landed (observed: the tracking ref pointing at neither the local ref nor the real remote head). Verify pushes ONLY with git ls-remote against git rev-parse <branch>, and inspect remote content via the commit object, never via the remote-tracking shortcut.